Battery Handling; Transport And Storage; Technical Data - Husqvarna QC330 Gebruiksaanwijzing
Verberg thumbnails
Zie ook voor QC330:
- Gebruiksaanwijzing (63 pagina's) ,
- Gebruiksaanwijzing (264 pagina's)
Inhoudsopgave
Advertenties
Operation
WARNING! Risk of electric shock and
!
short circuiting. Use approved and intact
wall sockets. Make sure that the cable is
not damaged. Replace cable if it appears
to be damaged in any way.
Connect the battery charger
•
Do not use product when a thunderstorm is
approaching.
•
Use the battery charger only when the surrounding
temperature is between 5 °C and 40 °C.
•
Use provided cable.
•
Connect the battery charger to the voltage and
frequency specified on the rating plate. LEDs on
battery charger flash 1 time. (4)
Connect the battery to the battery
charger.
The battery must be charged before using it the first time.
The battery is only 30% charged when delivered.
•
Ensure that the battery is dry before it is connected to
the battery charger.
•
Put the battery in the battery charger. Make sure that
the battery is connected to the battery charger. (1), (2)
•
The green charging light on the charger is lit when the
battery is connected to the battery charger. The
battery will not be charged if the battery temperature
is over 50 °C. In that case the battery charger will
actively cool down the battery. (4)
•
When all LEDs are off the battery is fully charged.
Press battery indicator for battery status. (7)
•
When the battery is fully charged the battery charger
will stop charging. Remove the battery from the
battery charger when it is fully charged.
•
Pull out the plug. Never jerk the power supply cable to
disconnect it from the wall socket. (3)
Transport and storage
•
Store the equipment in a lockable area so that it is out
of reach of children and unauthorized persons.
•
Store the battery and the battery charger in a dry,
moisture-free and frost-free space.
•
Store the battery charger where the temperature is
between 5 °C and 45 °C and never in direct sunlight.
•
Store the battery charger only in an enclosed and dry
space.
•
Be sure to store the battery separate from the battery
charger.
6 – English
BATTERY HANDLING
Maintenance
Make sure the battery and battery charger are clean and
that the terminals on the battery and the battery charger
are always clean and dry before the battery is placed in
the battery charger.
Keep the battery guide tracks clean. Clean plastic parts
with a clean and dry cloth.
Fault codes
Troubleshooting the battery and/or the battery charger
during charging.
(5), (6)
•
•
Disposal of the battery, battery charger
and machine
Symbols on the product or its packaging indicate that this
product cannot be handled as domestic waste. It must
instead be submitted to an appropriate recycling station
for the recovery of electrical and electronic equipment.
By ensuring that this product is taken care of correctly,
you can help to counteract the potential negative impact
on the environment and people that can otherwise result
through the incorrect waste management of this product.
For more detailed information about recycling this
product, contact your municipality, your domestic waste
service or the shop from where you purchased the
product.
Technical data
LED
Possible
displayBattery
faults
Error LED
Temperature
flashing
deviation.
Cell difference
Error LED is lit
too much (1V).
If the warning LED on the battery charger flashes red,
there is a fault with the battery. Send the battery to a
Husqvarna service workshop.
If the warning LED on the battery charger lights solid
red, there is a fault with the charger. Send the charger
to a Husqvarna service workshop. (5)
Technical data
Battery charger
QC330
Mains Voltage, V
100-240
Frequency, Hz
50-60
Power,W
330
Possible action
Use the battery
charger only when
the surrounding
temperature is
between 5 °C and 40
°C.
Contact your service
agent.
QC500
100-240
50-60
500
Advertenties
Inhoudsopgave
