Inhoudsopgave
Advertenties
Cleaning with water
only
Cleaning with cleaning
solution by default
Battery level: 10~20%
Battery level: 0~10%
Clean Water Tank is
empty
Need self cleaning
Appliance not on the
charging dock
Dirty Water Tank is full
Brush roller is tangled
Power is off
Start charging
Begin self-cleaning
cycle.
Battery insufficient for
self-cleaning
Sufficient battery to
start self cleaning
Cleaning brush roller
Cleaning debris
channel
Auto detecting
Deep cleaning
Self-cleaning stopped
Self-cleaning
complete
Cleaning with water
only
Cleaning with cleaning
solution
Low battery
Low battery, please
charge
Clean Water Tank
empty, please refill
water and cleaning
solution
Please begin self-
cleaning cycle
Please place appliance
on charging dock
Dirty Water Tank full,
please empty
Please clean the brush
roller.
Power off
Charging has
commenced
Auto-detecting
whether to run self-
cleaning cycle, please
begin self-cleaning
cycle
Low battery, start
charging
Start self cleaning
Cleaning brush roller
Cleaning debris
channel
Auto detecting
Deep cleaning
Self-cleaning cycle
stopped, please clean
Dirty Water Tank
Self-cleaning cycle
complete, please
clean Dirty Water Tank
MAINTENANCE
Note:
• For optimal performance and to prevent odors,
always clean and dry DWT, filters, brush roller,
brush roller cover completely after each use.
• Please make sure each part is installed correctly
or the appliance may not work properly.
• After maintenance, place the appliance on
the charging dock vertically. Do not expose
the appliance to direct sunlight, and store it
indoors in a dry place.
Main Body
1.To reduce the risk of injury, switch off before
performing maintenance.
Fig.D-1
2.Use a cloth to clean the surface with a neutral
detergent. The cloth should be dry to prevent
water from entering the appliance.
Fig.D-2
3.Clean the dirt sensor with a damp cloth or the
cleaning tool.
Fig.D-3
Dirty Water Tank
1.When dirty water reaches the Max line,
the appliance will stop working and show
a reminder on the display and play a voice
prompt.
2.Pull up the tank lid to empty the DWT. Use
the cleaning tool to remove remaining debris.
Rinse the inside of the DWT and place back
into the appliance.
Fig.D-4
Dirty Water Tank Lid
• If the Dirty Water Tank lid and the filter inside
have been blocked, remove the tank lid and
the filter, rinse both parts with water.
Fig.D-5
26
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
