Advertenties
3.2 LCD Screen
Remaining Charge/
Discharge Time
Extra Battery Indicator
Battery Level Indicator: The indicator will repeatedly fill while charging. If product is at 0% charge, the
indicator will flash to warn you.
Wi-Fi Status: After pressing the IOT button for 3 seconds, the Wi-Fi status will flash on the LCD screen
which indicates that the product is ready for pairing. There're two ways to connect the product with
the App, either directly connect to the product's hotspot or using the Internet. If the App is successfully
connected to the product's hotspot, the icon will keep flashing; if it is successfully connected to the
Internet, the icon will stay on.
* See Section 5 for more troubleshooting steps.
3.3 General Product Usage
Product On, Product Off, LCD Screen On
Short press the Main Power Button to turn on the product; the LCD Screen will light up and the
battery level indicator icon will display.
The product enters sleep mode after 5 minutes of idle operation; the LCD Screen will automatically
turn off. When the product senses any load change or operations, the LCD Screen will automatically
light up. To turn the LCD Screen on or off, please short press the Main Power Button.
To power off the product, press and hold the Main Power Button.
The default product standby time is 2 hours. With other Power Buttons turned off and no other load
access for 2 hours, the product will automatically shut down. The standby time can be set on the App.
6
Remaining Battery Percentage
Battery Level Indicator
USB-A Output
AC Output
Short Press to Turn On
Battery Failure Warning
Wi-Fi Status
USB-C Output
12V DC Output Indicator
Long Press to Turn Off
High Temperature Warning
Low Temperature Warning
Fan Indicator
Input Power
Output Power
Overload Warning
State of Charge
Advertenties
