9 Disposal / Recycling
Electrical and electronic old de-
vices contain a variety of valuable
materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
10 Technical data
Cutting type
Shred size (mm)
Sa fe ty ra ting DIN 66399
Cutting ca pa ci ty * (sheets), DIN A4 70 g/m
Cutting speed
Weight
Noise level (Idle running / load)
Lo ading width
Voltage
Power for the maximum number of sheets
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Dimensions W x D x H (mm)
Volume of shredded material bag
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during op-
eration. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
06/2014
Strip cut
5.8
3.9
P-2/O-2/T-2
P-2/O-2/T-2
E-2
E-2
2
65 - 67
48 - 50
80 g/m
51 - 53
38 - 40
2
100 mm/s
74 kg
60 dB(A) / 68 dB(A)
Classic 411.2
english
english
Cross cut
3.9 x 50
1.9 x 15
P-3/O-2/T-3
P-5/O-4/T-5
E-2
E-4/F-2
38 - 40
26 - 28
33 - 35
20 - 22
110 mm/s
60 dB(A) / 75 dB(A)
400 mm
230 V, 50 Hz
100 V, 50/60 Hz – 115 V, 60 Hz
2 100 W
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
595 x 470 x 990
146 l
0.78x11
1 x 5
P-6/F-3
P-7/F-3
17 - 19
11 - 12
12 - 14
10
82 kg
17