Inhoudsopgave
Advertenties
CONTROLS:
EN
• To activate, desactivate or change the lights, shortly press the light button (18).
• To enter ODO and TRIP display mode press for 3 sec the the light button (18).
• To turn the device on and off: press the
(16).
ON/OFF button
• To change the device's speed mode: briefly press the speed change button (17).
• To reset the TRIP press for 3 sec the speed change button (17).
• To set the time, connect via Bluetooth to the YEEP.ME MOBILITY APP. The time will
be updated automatically.
The application allows you to modify numerous options, such as the INDIVIDUAL
mode setting.
SPEED MODES:
There are 5 speed modes :
• Mode 1, (P) PEDESTRIAN mode, limited to 6 km/h.
• Mode 2, (E) ECO mode, limited to 15 km/h.
• Mode 3, (C) COMFORT mode, limited to 25 km/h.
• Mode 4, (S) SPORT mode, limited to 25 km/h : Use the full motor power
• Mode 5, (I) INDIVIDUAL mode, limited to 25 km/h : Use the bluetooth app to
personalized your mode as you wish (power and speed).
Information: In order to drive safely and in compliance with local regulations, you
must adjust your speed using the mode indicators.
When using mode 1, your speed will be limited to 6 km/h (maximum speed allowed on
pavements in some cities. It is the user's responsibility to check local regulations.)
Mode 2 allows you to limit the speed to 15 km/h.
Mode 3,4 and 5 allows you to ride up to 25 km/h depending on your weight. You can
also check your speed using additional equipment such as a smartphone or other
device.
3.2. UNPACKING AND ASSEMBLING THE DEVICE
To unpack the product, it is recommended to have a clear surface that is large enough
to unpack and prepare the device. Take the device out of its packaging, making sure
to not injure yourself or damage other products or your surroundings. Have someone
help you if the product is too heavy for you to handle on your own (the weight of the
device is indicated on the packaging).
Before using the product, your device may need the handles or brake to be assembled.
To do this, unfold the device (see following sections) and install the brake lever on the
handles as per the following instructions:
An adult must unpack and assemble the device.
1. Before screwing on the handles, install the braking lever on the left-hand side and
adjust the position of the brake lever by screwing it on once the handles have been
installed.
14
Advertenties
Hoofdstukken
Inhoudsopgave
