Inhoudsopgave
Advertenties
Safety instructions
Warning against hot surfaces!
The lamp can become hot in the area of light
emission. Therefore, keep a distance of at least
•
Do not cover the light emission.
•
Do not place the lamp with the light emission pointing
downwards.
•
Do not open the lamp.
•
There is a risk of a short circuit. Repairs to the lamp may only
be carried out by persons authorised and trained for this
purpose. Contact your Würth branch.
A damaged lamp or charger may no longer
be used and may only be replaced by the
manufacturer.
Charge the battery
•
Charge before first use. Charging time: 6-8 h
•
Plug in the charging cable. Switch off the light during
charging.
During the charging process, one LED of the light flashes
green. Charging is complete as soon as all five LEDs light up
green.
The following charging options are available
•
USB power supply to a 100-240 V/AC, 50/60 Hz
socket via USB-C port/magnetical charging cable
•
USB vehicle adapter (optional) on a 12 V/24 V socket
via USB-C port/Magnetical charging cable
•
Third device with USB socket via USB-C port/magnetical
charging cable
Battery capacity indicator
The remaining capacity of the battery is indicated by five
green LEDs. The LEDs are located on the side of the lamp
housing. As soon as only one LED is still flashing green,
charge the lamp.
Note
Always keep the USB-C charging socket on the lamp
closed and free of dirt.
Maintenance and care
Visual inspection before starting work
The lamp is maintenance-free. Nevertheless, the lamp and
accessories must be checked for external damage before
each use.
If damage is visible, the lamp must not be used.
It must be repaired or disposed of by a commissioned
and trained person. Please contact your Wurth branch.
Damaged charging cables and mains adapters must be
replaced immediately.
14
Cleaning
Switch off the lamp and disconnect the mains plug before
carrying out any cleaning work. Clean with a dry cloth
only. Some cleaning agents damage plastic or other
insulated parts. Keep the device clean and dry, free from
oil and grease. Remove stubborn dirt with a damp cloth
and a standard household cleaner. Never use cleaning
agents containing alcohol, solvents or abrasives as these
will damage the housing.
Storage
Fully charge the fixture before storing it for an extended
period of time. Store the machine in a dry place out of the
reach of children.
Disposal
Do not throw the lamp into the
household waste!
Always recycle small electrical appliances
and packaging in an environmentally
friendly manner. According to the European
Directive 2012/19/EU, power tools that
are no longer usable must be collected
separately and recycled in an environmentally sound
manner.
Integrated battery pack
Fully charge the appliance prior to initial use.
Fire hazard! Risk of explosion!
•
Never use appliances if the integrated battery packs or
batteries are damaged, defective or deformed. Never
open, damage or drop the appliance.
•
Never charge the appliance in the vicinity of acids and
inflammable materials.
•
Incorrect charging or charging outside the permissible
range can destroy the integrated battery pack or batte-
ry and increase the risk of fire.
•
Protect appliances against heat and fire. Never place
them on radiators or expose them to strong sunlight for
extended periods. .
•
Allow them to cool down after prolonged use.
The appliance must not be allowed to become wet. Protect
the appliance against humidity and moisture!
Damage or incorrect use can cause harmful vapours and
liquids to leak from the battery pack or battery.
Vapours leaking from a battery pack or battery can irritate
the respiratory tract. Immediately provide a supply of fresh
air and seek medical advice if symptoms persist!
If liquid leaks from a battery pack or battery, make sure
that it does not come into contact with the skin or eyes! If
contact occurs, rinse the affected area with water and seek
medical advice!
Advertenties
Inhoudsopgave
