Inhoudsopgave
Advertenties
INSTALLATION
Appliance description
6.
Appliance description
Standard delivery
MEBD illustration
7
8
1 Water inlet pipes
2 Tap body
3 Lever
4 Changeover: Hand shower - outlet
5 MEBD: Hand shower with retainer
6 Wall connection
7 Fixing bracket with gasket (not part of the DCE compact in-
stantaneous water heater set)
8 Spout with aerator
- Plugs (2 pce) for sealing the concealed connections (not part
of the DCE compact instantaneous water heater set)
10
| MEKD | MEBD
1
2
3
4
6
5
7.
Installation
Note
Ensure that the connection hoses are not kinked or under
tension during installation.
7.1
Cold water connection via tap
f Screw the wall connectors into the wall plate.
f
f Insert the tap body into the wall connector.
f
f Where appropriate, seal the concealed connections of the
f
instantaneous water heater with plugs.
7.2
Cold water connection via the instantaneous
water heater (not via the DCE compact
instantaneous water heater)
f Secure the anchor base on the wall.
f
f Screw the tap body into the anchor base.
f
7.3
Connecting the instantaneous water heater
f Deburr the pipes if you have reduced them.
f
f Insert the water inlet pipes to connect the instantaneous
f
water heater and the tap body.
f Fit the spout with shower hose and the retainer for the hand
f
shower onto the tap body.
8.
Commissioning
f Disconnect the mains fuse/switch off the MCB of the instanta-
f
neous water heater.
f Lift the lever.
f
f Wait until the water is flowing from the spout without
f
bubbles.
f Reconnect the mains fuse/switch on the MCB of the instanta-
f
neous water heater.
www.stiebel-eltron.com
Advertenties
Hoofdstukken
Inhoudsopgave
