Download Inhoudsopgave Inhoud Print deze pagina

Butler 16100128 Handleiding pagina 24

Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 47
2. Pour the solution into the reservoir
and switch on the apparatus using the
on/off button.
3. Allow half of the solution to run
through, and then switch off using the
on/off button.
4. Switch off for around 10 minutes, and
then switch on again, and allow the
rest of the solution to run through.
5. To remove the final residues of
limescale and acetic acid, pour a
potful of cold water into the water
reservoir, switch on and allow the
water to pass through.
6. Run fresh water through the
appliance 3 times (as described in
point 5). The apparatus now ready for
use.
FOR UNITED KINGDOM
ONLY
Plug wiring:
This product is fitted with a BS 1363 13-
amp plug. If you have to replace the fuse,
only those that are ASTA or BSI approved
to BS1362 and with a rated current of 13
amps should be used. If there is a fuse
cover fitted, this cover must be refitted
after changing the fuse.
UK
If the fuse cover is lost or damaged, the
plug must not be used. You must also
check if the socket outlets in your home
fit with the plug of the appliance. If the
socket outlet in your home does not fit
with the plug, the plug must be removed
and disposed of safely as insertion of the
plug into the socket is likely to cause elec-
tric hazard. A replacement plug should be
wired according to following description.
Important
This appliance must be earthed. The
wires in the cord set are coloured thus:
BLUE- Neutral, Brown-Live, Green&
Yellow-earth (For detachable plug only)
As the colours of the wires in the mains
lead of this appliance may not correspond
with the coloured markings identifying the
terminals in your plug, proceed as follows:
The wire that is coloured Green& Yellow
must be connected to the terminal in the
plug that is marked with the letter E or
by the earth symbol,or coloured green &
yellow.
The wire that is coloured blue must be
connected to the terminal that is marked
with the letter N or coloured black.
The wire that is couloured brown must be
connected to the terminal that is marked
with the letter L or coloured red
24

Advertenties

Inhoudsopgave
loading

Inhoudsopgave