Inhoudsopgave
Advertenties
Operation
7
Operation
7.1
Power on and off
7.2
Receiving data
and printing
7.3
Feed paper
7.4
Tearing off the
paper
8
Auto power off
22
•
Press the POWER button to turn the printer on
and off. The POWER button shines green
when the power is on.
You can now start to send the data from the
measurement instrument to the printer.
Place the printer with the IR receiver (3) toward
the transmitting instrument.
NOTE!
The distance between the transmitting instrument
and the printer should be 0,30 m approx. and the
angle should not exceed ± 15°. Take care that
there is no object between the printer and the
transmitting instrument.
When the printer is switched on, press the
•
FEED PAPER button (▲) to feed the paper.
For continuously feeding paper, just hold
•
down the FEED PAPER button (▲).
Tear off the paper carefully from the left to the
•
right.
The printer turns off automatically after 10
•
minutes inactivity.
The auto sleep default is ON.
To switch off or activate again this function,
•
hold down "POWER" button for around 3 sec-
onds while power is on.
In the mean time, it prints out the status.
Advertenties
Hoofdstukken
Inhoudsopgave
