Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Indications
4
Indications
WARNING!
Depending on the use, the print head may be hot. Do not touch the print head! Danger
of burning! Do not bring temperature sensitive objects near to the print head.
ATTENTION!
A secure operation will not be possible, if the printer case is damaged or water has
penetrated.
5
Getting started
5.1
Batteries
Fig. 4: Bottom of the printer
20
6
7
•
8
9
•
NOTE!
Only use alkaline batteries with the printer. If zinc-
carbon batteries are used, the printer may switch
off unintentionally.
Open the battery compartment at the bottom
of the printer by pulling the lever (8) and re-
moving the battery cover (9) at the same time.
NOTE!
Pull the lever strongly. The safe closure guaran-
ties that the battery compartment will not open
accidentally.
Insert 4 AA batteries. Observe the polarity
indicated on the bottom of the battery com-
partment.
NOTE!
Remove the batteries, if you intend not to use the
printer for a certain time.
NOTE!
When the battery voltage gets too low to support
the printing, the red LED light blinks. In this case
change the four batteries.
Advertenties
Hoofdstukken
Inhoudsopgave
