Inhoudsopgave
Advertenties
PARTS DESCRIPTION
1. Air outlet
2. Control panel
3. Body
4. Base
5. Remote control
Control panel
OSCILLATI
TIMER
POWER
ON
BEFORE THE FIRST USE
•
Place the device on a flat stable surface and ensure a minimum
of 100 cm. free space around the device. This device is not
suitable for installation in a cabinet or for outside use.
•
Connect the power cable to the socket. (Note: Make sure the
indicated voltage on the device matches the local voltage before
connecting the device. Voltage 220V-240V~ 50/60Hz.)
•
When the device will not be in use for a long time, please unplug
the power cord.
•
Warning: The below may sometimes occur due to the overlap of
the remote control frequencies. Please pay attention to this while
using the remote control:
1. This device may react when using a remote control for other
appliances.
2. When using the remote control of this device, other electrical
appliances may react.
•
Place 2x AAA batteries into the remote control, make sure the
polarity (+ and -) is correct.
USE
•
Place the unit on a firm level surface.
•
Plug in the unit.
•
Select the desired setting using the icons on the display or the
buttons on the remote control.
Display / Remote control buttons
SPEED
MODE
•
oscillation function. The fan will swing from left to right. Press
again to stop oscillating.
•
between 1 hour to 15 hours.
•
by pressing the power button.
•
speed. Choose from 3 levels - 1 LOW - 2 MEDIUM - 3 HIGH.
Oscillation icon/button: Press Oscillation to turn on the
Timer icon/button: Press timer to select the desired range
Power icon/button: The device can be switched on and off
Speed icon/button: Press to increase or decrease the fan
Instruction manual
EN
5
Advertenties
Inhoudsopgave
