Advertenties
Beschikbare talen
Beschikbare talen
Battery Charging
EN
1.
Place battery pack in charger.
2.
Align raised ribs on battery pack with groove in charger.
3.
Press down on battery pack to be sure contacts on battery pack engage properly with contacts in charger. When properly connect-
ed, the red light will turn on. Red flashing light indicates fast charging mode.
4.
Red and green light flashing indicates defective battery pack. Return battery pack to your nearest SENCO Authorized Service Center
for inspection or replacement.
5.
Solid red light indicates that the battery is charging.
6.
When your battery pack becomes 80% charged, the red light will stay on and the green light will flash. When battery pack is fully
charged, the red light will turn off and the green light will turn on.
7.
After normal usage, 1 hour of charge time is required to be fully charged. A maximum charge time of 1 hour or less is required to
recharge a completely discharged battery pack.
8.
The battery pack will become slightly warm to the touch while charging. This is normal and does not indicate a problem.
The battery pack houses 4 colored LED lights. These LEDs indicate the state of charge and possible problems inside the battery pack.
Battery Pack
Mode
Inserted?
Standby/Power
No
Standby Full
Yes
Charging
Yes
Fully Charged
Yes
Evaluating
Yes
*Temp Delay
Yes
Defective
Yes
Press raised red button on battery pack to check charge:
• Red Flashing = 0-15% Charge
• Red On = 16-25% Charge
• Red and Orange On = 26-50% Charge
• Red, Orange, and Green On = 51-75% Charge
• All On = 76-100% Charge
Tips for maintaining maximum battery life:
• Charge the battery pack before it is completely discharged.
• Always stop tool operation and charge the battery when you notice less tool power.
• Never recharge a fully charged battery.
• Overcharging shortens the battery service life.
CHARGER SYMBOLS
SYMBOL
Double Insulated Class II
CAUTION: High Voltage
Power
Charging/Full
Fade
x
Fade
Fade
Solid Green
Flashing Green
Fading Green
Fading Green
Solid Green
x
Solid Green
x
Solid Green
x
Figure 2 - Battery Charge Level Lights
SIGNAL
Time Delay Fuse
Condition
Evaluate
x
x
Ready for Use
x
<80%
x
100%
x
Measuring
Flash Orange
Hot/Cold
x
Damaged
x
14
Temp. Delay
Error
x
x
x
x
x
x
x
x
x
x
Flash Orange
x
x
Solid Red
Advertenties
