Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2) Select the desired melody for the acoustic alerting. To do this, turn the
control wheel until the desired melody is heard. Press the control wheel
button to select it.
3-3. Unregister a transmitter:
To unregister a transmitter, proceed as follows on the receiver unit:
1) Press and hold the control wheel button for 2 to 3 seconds. The green
doorbell event indicator lights up and starts flashing. If necessary, press
the button again to change to the orange telephone event indicator.
Otherwise, press the button again to cancel the process.
2) When the according event indicator flashes on the receiver, press and
hold the control wheel button for 2 to 3 seconds. A beep is heard if the
unregistration was successful.
3-4. Indication selector:
The slider switch on the right-hand side of the unit can be used to select 3
different alerting modes:
1) Sound only
2) Sound and flash
3) Flash only
3-5. Adjusting the volume:
8 volume levels can be set with the control wheel button. To do this, turn
the wheel up or down. Each volume level is indicated by a beep, a double
beep means that the maximum setting has been reached.
The volume can be changed at any time. Exceptions: The receiver is in
pairing mode or the battery level indicator is lit.
Please note that the volume setting applies to both event indicators.
20 English
Advertenties
Inhoudsopgave
