Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Step 6:
Attach the handle grip (4) at support (82).
1. Push a washer (3) onto each screw (14).
2. Place the handle grip (4) against the holder at support (82) and
tighten the handle grip (4) at handlebar support (82) firmly.
Step 7:
Attach the computer (1) at support (82).
1.
Put the plug of connection cable (81) into the plug from com-
puter (1) backside.
2.
Insert the plug of pulse connection cables (20) to the jack of
the computer (1) and attach the computer (1) to top monitor
bracket of front post (82) with screws (2). (Attention: Ensure that
the cable loom are not crunched or pinched during installation.)
Step 8:
Attach the power.
1.
Please insert the plug of adaptor (86) to the power plug (53) at
end of chain guard.
2.
Please insert the plug of adaptor (86) to the jack of wall power
(230V~50Hz).
Step 9:
Checks
1.
Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2.
When everything is in order, familiarize yourself with the ma-
chine at a low resistance setting and make your individual
adjustments.
Note: Please keep the tool set and the instructions in a safe place
as these may be required for repairs or spare parts orders becoming
necessary later.
23
Advertenties
Inhoudsopgave
