Download Inhoudsopgave Inhoud Print deze pagina

Disassembling Your Mask For Cleaning; Cleaning Your Mask - ResMed AirFit F30i Handleiding

Verberg thumbnails Zie ook voor AirFit F30i:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 43
Sizing the mask
Use the fitting template to assist in selecting the right size cushion.
If the mask frame falls back over your head or sits too close to your ears,
try a smaller frame size. If the mask falls forward on your head or sits too
close to your eyes, try a bigger frame size.

Disassembling your mask for cleaning

If your mask is connected to a device, disconnect the device air tubing
from the mask elbow.
1. Undo the fastening tabs on the upper headgear straps and pull from
the frame. Keep the magnetic clips attached to the lower headgear
straps.
2. Squeeze the side buttons on the elbow and detach from the frame.
3. Grip the frame connector and lift to unclip from the cushion. Repeat
on the other side.

Cleaning your mask

If there is any visible deterioration of a mask component (cracking,
crazing, tears etc.) the component should be discarded and replaced.
Daily/After each use: Cushion
4

Advertenties

Inhoudsopgave
loading

Deze handleiding is ook geschikt voor:

Airfit n20 classic

Inhoudsopgave