Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
2. Safety Notes
• Protect all electrical supply lines, insulation and heating cables on the pipes from browsing.
• Install a protective bracket on this watering basin in narrow stalls and bays (see item 4)
• Install the transformer and the 230V power cables away from the reach of the animals
• The 230V cable to the transformer must be fused separately
• The electrical installation may only be carried out by a qualified electrician
• Test the functionality of the entire electrical installation before the first frost of the season
• Do not completely unscrew the regulation screw on the valve. There is no limit stop to prevent the regulation screw
from being removed!
3. Maintenance
6.1 Changing the Heating Element
In order to remove the enamel inside basin, for example in order to change the heating element, the pipe valve must be
screwed off the installation elbow using an open-end spanner (SW24). Then release the hexagon bolt on the underside
of the basin using an open-end spanner (SW13). The enamel inner basin can now be removed without having to remove
and therefore re-seal the installation elbow.
6.2 The Basin needs to be cleaned regularly.
The watering basin needs to be cleaned regularly in order allow the animal optimum water intake. This serves the health
of the animals and ensures a longer lifespan for the watering basin.
4. Accessories
#222019 – Pipe attachment bracket, in pairs
for a pipe diameter of 1"-3"
Transformer
#222796 - 100 W
#222797 - 200 W
#222626 - 300 W
#222798 - 400 W
#221971 – Protective bracket for drinking
basins Size 2
Antifreeze Thermostat
#222794
17
Advertenties
Inhoudsopgave
