Download Inhoudsopgave Inhoud Print deze pagina

Messages In The Display - Sentiotec A2 Montage- En Gebruiksaanwijzing

Saunabesturing
Verberg thumbnails Zie ook voor A2:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 114
All manuals and user guides at all-guides.com
Instructions for use for the user

12.3. Messages in the display

Error messages in the display 1
An error message indicates an electrical malfunction in the system.
The sauna control unit is no longer operational.
1. Note the error message.
2. Switch off the sauna control unit.
3. Switch off the main fuse of the sauna control unit in the fuse box.
4. Contact customer service.
Error
Description
E-F1
Short circuit/broken wire/
heater sensor defective
E-24
Broken wire or damage
to the excess tempera-
ture fuse.
E-PI
Damage in the potenti-
ometer for the tempera-
ture setting.
E-51
PLUS/MINUS time but-
E-52
tons or START/STOP
E-53
button blocked
Status messages in the display 1
LL
The interior temperature is under 0 °C
HH
The interior temperature is above 140 °C
WORLD OF WELLNESS
Cause / rectification
See point 5. Troubleshooting for the
installer on page 15
See point 5. Troubleshooting for the
installer on page 15
See point 5. Troubleshooting for the
installer on page 15
Remove cover and control panel, setup
buttons, put control panel and cover back
on.
p. 25/28
EN

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Sentiotec A2

Deze handleiding is ook geschikt voor:

O-a2-9

Inhoudsopgave