Download Inhoudsopgave Inhoud Print deze pagina

Sentiotec A2 Montage- En Gebruiksaanwijzing pagina 44

Saunabesturing
Verberg thumbnails Zie ook voor A2:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 114
All manuals and user guides at all-guides.com
Installation instructions, for professionals only
c. Remove the housing cover and the control panel.
d. Turn the knob to the maximum setting (as far as it goes to the right).
e. For the vertical 10-pin connector, short-circuit pin 1 and pin 2
use a suitable screwdriver, as shown in the figure below.
f.
Pin 1 and pin 2 are the bottom 2 contacts.
g. Switch on the control unit.
h. The display shows P123 or P1.
i.
Disconnect the connection between pin 1 and pin 2.
j.
Wait about 5 seconds and then press and release the start button.
k. Finally, reassemble the control unit in reverse order of disassembly.
!
If a problem persists, consult your supplier.
WORLD OF WELLNESS
p. 16/28

Advertenties

Inhoudsopgave
loading

Gerelateerde Producten voor Sentiotec A2

Deze handleiding is ook geschikt voor:

O-a2-9

Inhoudsopgave