Download Print deze pagina

Clean Track NANOscrub E36 Handleiding pagina 49

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 187
8.3.
NOT ENOUGH OR TOO MUCH CLEANING
SOLUTION
The solution water tank is empty.
 Fill the solution water tank after having emptied
the recovery tank.
 The solenoid valve switch is in the OFF position
 Set the solenoid valve switch to the ON position
 The solution water valve is is closed or almost
closed.
 Adjust/increase the detergent solution outlet flow
by turning the flow adjustment lever.
 The solution water filter is dirt and clogged in
some point.
 Open the filter and clean it removing the dirt.
8.4.
NO SUCTION
 The suction hose is not connected to the squeegee.
 Connect it correctly.
 The suction hose or the squeegee conduit are
obstructed.
 Clean out and remove any obstructions from the
conduits.
 The suction motor is turned off.
 Activate it.
 The recovery tank is full.
 Empty it.
 The suction motor is not receiving electric power
or is burned.
 Check the connections and, for the latter case,
replace the motor.
8.5.
INSUFFICIENT SUCTION
 The cover of the suction compartment is not per-
fectly closed.
 Close it correctly.
 The suction hose or the squeegee conduit are ob-
structed.
 Clean out and remove any obstructions from the
conduits.
8.6.
THE BRUSH MOTOR OR THE SUCTION
MOTOR DOESN'T STOP
 Stop the machine, cutting off the main power sup-
ply and disconnecting the main battery connector,
and contact the technical service centre.
8.7.
THE SQUEEGEE DOESN'T CLEAN OR DRY
EFFICIENTLY
 The squeegee blades are worn or are dragging
solid dirt.
 Replace or clean them.
 The squeegee adjustment is not correct; the ad-
8. OPERATING CHECKS INFORMATION
49
vancement must be exactly perpendicular to the
running direction.
 Adjust the squeegee.
 The suction hose or the squeegee conduit are ob-
structed.
 Clean out and remove any obstructions from the
conduits.
THE BATTERY CHARGER DOESN'T WORK
8.8.
 The battery charge doesn't start .
 Check that the battery charger is connected to the
battery. Consult the battery charger manual.
8.9.
THE BATTERIES DO NOT CHARGE OR DO
NOT HOLD A CHARGE
 The batteries are new and do not generate 100%
of the rated performances.
The accumulator reaches the maximum perfor-
mance after 20-30 complete charge cycles.

Advertenties

loading

Gerelateerde Producten voor Clean Track NANOscrub E36

Deze handleiding is ook geschikt voor:

Nanoscrub b36