Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Basic operation
Place the device on the base plate . Unfold the base
arm
on the device until it engages (see illustration). The
camera
is equipped with a cover . Open the camera
EN
cover and move it to the intended position (see illustration
on fold-out pages A1 and A2). If the
symbol is shown,
the camera cover has not been opened.
Use the joint
to set the required screen height and tilt
angle.
Connect the power adapter to a suitable device plug. Connect its cable to the connection
for the power adapter . Then plug the power adapter into the power socket.
The charging control LED
lights up while the device is being charged.
To fold the device together again move the screen to the rear. Then fold the camera
together and close the camera cover (see illustration). Thereafter, fold the base arm
downward.
Turning on/o
Press the On/O button . The camera image will appear on the screen
after a few
seconds. Symbols brie y show the current status, for example magni cation factor and
brightness setting.
To turn the device o , press and hold the On/O button
for one second. Current
settings are saved.
Reading with the device
Turn the device on and place the reading material on the base plate
under the
camera .
In exceptional cases it can make sense to relocate the eld of vision to the upper area
of the base plate. To do this, swivel the camera out past the locking position.
- 21 -
BDA_vario DIGITAL FHD_DE_EN_FR_IT_ES_NL.indd 21
18.12.2018 14:51:37
Advertenties
Inhoudsopgave
