Inhoudsopgave
Advertenties
Original instructions
READ ALL INSTRUCTIONS!
READ OPERATOR'S MANUAL
WARNING:
To ensure safety and reliability, all repairs
and replacements should be performed by a qualified
service technician.
SAFETY SYMBOLS
The purpose of safety symbols is to attract your attention
to possible dangers. The safety symbols and the
explanations with them deserve your careful attention
and understanding. The symbol warnings do not, by
themselves, eliminate any danger.
The instructions and warnings they give are no substitutes
for proper accident prevention measures.
WARNING:
Be sure to read and understand all
safety instructions in this Operator's Manual, including all
safety alert symbols such as "DANGER," "WARNING,"
and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire,
and/or serious personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates DANGER,
WARNING, or CAUTION. May be used in conjunction with
other symbols or pictographs.
WARNING:
The operation of any power tools can
result in foreign objects being thrown into your eyes, which
can result in severe eye damage. Before beginning power
tool operation, always wear safety goggles or safety glasses
with side shields and a full face shield when needed. We
recommend a Wide Vision Safety Mask for use over
eyeglasses or standard safety glasses with side shields.
56 VOLT LITHIUM-ION CORDLESS HEDGE TRIMMER — HTX6500/HTX7500
SAFETY INSTRUCTIONS
This page depicts and describes safety symbols that may
appear on this product. Read, understand, and follow
all instructions on the machine before attempting to
assemble and operate.
Indicates a potential personal
Safety Alert
injury hazard.
Read
To reduce the risk of injury, user
Operator's
must read the operator's manual.
Manual
Never attempt to operate your
power tool with one hand. Loss of
control of the power tool resulting
Keep hands and
in serious or fatal injury may result.
feet away from
To reduce the risk of cut injuries,
the cutting tool
keep hands and feet away from the
cutting tool. Never attach a moving
cutting tool with your hand or any
other part of your body.
Always wear safety goggles or
Wear Eye
safety glasses with side shields and
Protection
a full face shield when operating
this product
Guaranteed sound power level.
Noise emission to the environment
XX
Noise
according to the European
community's Directive.
This product is in accordance with
CE
applicable EC directives.
This product is in accordance with
UKCA
applicable UK legislation.
Waste electrical products should
not be disposed of with household
WEEE
waste. Take to an authorized
recycler.
Blade Length
The length of the blade
XXcm
ØXX mm
Cutting Capacity Max. Cutting capacity of the blade
IPX5
IP symbol
Protection against water jets
V
Volt
Voltage
Direct Current
Type or a characteristic of current
.../min
Per Minute
Revolutions per minute
EN
5
Advertenties
Inhoudsopgave
