Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Operating Instructions
1.
Wear the machine comfortably, adjust the harness
if needed.
2.
Stand upright, with the anti-static curved
handpiece section parallel to the floor.
3.
Always ensure that the cord is connected to the
cord restraint, and secured by the hook, as shown
on page 15 (Installing the cable).
4.
Turn the machine on. The switch is located
underneath the machine.
5.
Hold the anti-static curved handpiece with one
hand at a comfortable arm's length.
6.
Move forward and away from the power point.
7.
Use easy underarm swinging motion when detail
cleaning and short dabs when spot cleaning, always
standing upright.
Removing the cable
1
2
3
14
8.
9.
10. If work is completed disconnect power cord from
Push the cable forward to release the cord from the hook.
Once disengaged from the hook, pull the cable out by passing it through the
slot.
You may have to push the waistband buckle aside to allow the cable to pass
through.
Pull the cable until it is clear from the machine.
Once the end of the power cord has been reached
and work completed, return to the powerpoint
along the cord line to switch the power off, and
disconnect the power cord from the powerpoint.
If work is not completed and you need to move
to another area, switch mains off, disconnect the
power cord, move toward desired area, connect
power cord to the nearest powerpoint and repeat
steps 1 through 6.
the power point and wind from the machine
towards the end of the power cord to reduce
likelihood of cable twists. In the process check for
nicks, cuts, fractures, and knots.
Advertenties
Inhoudsopgave
Probleemoplossen
