Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en - Areas of application
Installation
40
The wash water used for reprocessing narrow-lumened instru-
ments needs to be filtered. The injector rails can each be fitted with
an A 800 tubular filter for this purpose. The tubular filter is supplied
with its own operating instructions.
Due to their length, surgical suction devices used in dental applica-
tions cannot be reprocessed using the A 315 module if an upper
basket is being used in the cleaning machine at the same time. For
this reason, surgical suction devices must be reprocessed in an up-
per basket with an injector rail, such as the A 105/1.
Cleaning the A 800 tubular filter
The tubular filter must be cleaned at least once a week.
We recommend cleaning the tubular filter after every 10 programme
sequences.
Follow the cleaning instructions in the operating instructions for the
tubular filter.
A 803 holder for transmission instruments
A 803 holders must be retro-fitted for reprocessing dental transmis-
sion instruments. The holders are suitable for almost all standard
transmission instruments.
Remove a nozzle from the injector manifold and replace it with an
A 803 holder.
When the A 803 holders are used, the wash water must be filtered.
The injector manifold must be fitted with an A 800 tubular filter.
The tubular filter is supplied with its own operating instructions.
Follow in particular the instructions on how to perform regular
cleaning on the tubular filter.
Advertenties
Hoofdstukken
Inhoudsopgave
