Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
B. Installation instruction
1) Location and size
The heat pump should be installed in a place with good ventilation
* MINIMUM DISTANCE
Filter
Water processor
Water switch
2) The frame must be fixed by bolts (M10) to concrete foundation or brackets.
The concrete foundation must be solid and fastened; the bracket must be
strong enough antirust treated;
3) Please don't stack substances that will block air flow near inlet or outlet
area, and there is no barrier within 50cm behind the main machine, or the
efficiency of the heater will be reduced or even stopped;
4) The machine needs an appended pump (Supplied by the user). The
recommended pump specification-flux: refer to Technical Parameter, Max.
lift ≥10m;
5) When the machine is running, there will be condensation water discharged
from the bottom, please pay attention to it. Please hold the drainage nozzle
(accessory) into the hole and clip it well, and then connect a pipe to drain
the condensation water out.
9
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
