Download Inhoudsopgave Inhoud Print deze pagina

Heating Mode; Dehumidifying Operation; Cooling Mode; Ventilation Mode - Duux North Gebruikershandleiding

Verberg thumbnails Zie ook voor North:
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 22
Power switch
Press the ON/OFF button and the unit will start
1
in cooling mode. The pre-set temperature is
25⁰C on medium fan speed. Only when unplug-
ging the device will it go back to the pre-set
settings.
To turn the unit off press the ON/OFF button
2
again. When the device is turned ON/OFF using
the power button, it will remember the last
setting except timer. Timer is cancelled after
power off and will not be remembered.
Note: The display window shows the ambient
room temperature from 0⁰C to 50⁰C.
Select operation mode
Press the
button to select the preferred
operation mode: cooling, heating
9K model - DXMA22)

Cooling mode

When the air conditioner is in cooling mode, it
cools the room. The compressor is then switched
on. When the air conditioner has reached the
desired temperature, it will switch to ventilation
mode. Press the
up. Press the " - "or" + "buttons to select a desired
room temperature. The temperature can be from
16℃ to 31℃. Press the
speed.
14
(only available on
, dehumidifying or fan.
button till the
icon lights
button to select wind

Heating mode

When the air conditioner is in heating mode,
it heats up the room. The compressor is then
switched on. When the air conditioner has reached
the desired temperature, it will switch to ventilation
mode. Press the
button till the
up. Press the " - "or" + "buttons to select a desired
room temperature. The temperature can be from
16
to 31
. Press the
speed.
Note: Heating mode is only available on the
9K model (DXMA22)

Dehumidifying operation

In dehumidifying mode the device will turn on the
compressor and starting dehumidifying the room.
Press the
button till the
wind will stay in low speed in dehumidiying mode.

Ventilation mode

In ventilation mode, the air conditioner will only
ventilate. It circulates the air in the room, which has
a cooling effect. The compressor will not switch on
in this mode. Press the
speed between 1, 2 or 3.
Setting the timer
The timer can be used to automatically activate
1
the air conditioner between 1 and 24 hours.
icon lights
button to select wind
icon lights up. The
button to select wind

Advertenties

Inhoudsopgave
loading

Inhoudsopgave