Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
When the surrounding temperature is 25℃ and the wine cooler has no bottle loaded, it will
take around 10 minutes to increase the wine cooler's temperature from 5℃ to 12℃. Under
the same circumstance, it will take around 20 minutes to decrease the wine cooler's
temperature from 12℃ to 5℃. The less the temperature span is, the less time it will take.
The setting temperature of upper zone should be lower than the setting temperature of
lower zone
Temperature display
Display show at its setting.
To view the actual temperature in either zone at any time, touch key (B) and key (C) for 3 second, the display
will display two zone's actual temperature with flashing, and it will quit by holding stop.
NOTE: when first used or after operating the wine cellar after a long period of inactivity, the inner temperature
will not immediately be the temperature setting on the display. Indeed, it is necessary to wait a few hours for
a temperature adjustment of the wine cellar in order to have a homogeneous temperature. To avoid excessive
condensation when the ambient temperature is above 28°C, do not lower the temperature to below 7°C.
IMPORTANT: after unplugging, turning off the power or after a power failure, it is imperative to wait 5
minutes before turning it on again.
Temperature alarm
The alarm will sound and the temperature display will flash when:
-
The temperature in one of the zones rises or falls outside the temperature range (5-12°C or 12-20°C)
-
You switch the appliance on, if the temperature inside the appliance is very different (+/- 4°C) from the
temperature set after 7 hours working
-
Too many items have been put into the unit at one time, and the temperature inside the appliance is very
different (+/- 4°C) from the temperature set after 7 hours working
-
The door has not been closed tightly
Door alarm
If the door has been left open for more than 60s, the alarm will sound. Once the set temperature has been
reached in the appliance, the alarm stops and the relevant temperature display stops flashing. However, if
the noise disturbs you, you can switch the alarm off before this if you wish by pressing the key I once. The
alarm will stop. The relevant temperature display continues to flash until the set temperature has been
reached. The display then lights up constantly and the alarm system is fully active again.
Interior light
The interior light makes it easy to view your wines labels and enhances the display of your collection.
Touching the mark (J) toggles between two modes of operation for the internal lights:
-
Functional mode (default): the light will turn on only when the door is open, this is the most economic mode
-
Showcase mode: the lights will be on whether or not the door is open. To turn this permanent light mode and
get back the default mode, please push again the light button (J).
5. EQUIPMENT
The climate control system
According to advice from specialists, the ideal temperature for storing wine is around 12°C, within a bracket of 10 to 14°C. Do
not confuse this with service temperature, which varies between 5 and 20°C, depending on the specific nature of the wine.
It is especially important to avoid sudden changes in temperature. Designed by specialists for oenophiles, this appliance, unlike
a simple refrigerator, takes into account the sensitivity of grand cru wines to sudden variations in temperature by ensuring the
close control of a constant average temperature.
The anti-vibration system
Advertenties
Inhoudsopgave
