Inhoudsopgave
Advertenties
Problem
The vacuum cleaner
does not start when it is
switched on.
The cleaning perform-
ance is poor.
Cleaning performance is
reduced.
Cause and remedy
There is no battery inserted or the battery has been
inserted incorrectly.
Insert the battery or check how the battery is posi-
tioned (see "Installation and connection" – "Insert-
ing the battery").
The rechargeable battery is not sufficiently charged.
Charge the battery exactly as described in these
operating instructions (see "Installation and con-
nection" – "General battery information" and
"Charging the battery").
An original Miele battery has not been inserted.
Insert an original Miele AP01/AP02/AP03 lithium-
ion rechargeable battery (HX LA).
The battery was not placed in the PowerUnit when
charging it for the first time.
To activate the battery, it must be placed in the
PowerUnit the first time it is charged (see "Install-
ation and connection" – "General battery informa-
tion" and "Charging the battery").
The charging plug is still plugged in.
Pull the charging plug out of the charging socket on
the bottom of the battery.
The dust container is full.
Empty and clean the dust container (see "Mainten-
ance").
The Electrobrush is dirty/blocked.
Clean the Electrobrush (see "Maintenance –
Cleaning the Electrobrush" and "Removing the
roller brush from the Electrobrush").
The fine dust filter/pre-filter is soiled.
Run the interim cleaning function for the fine dust
filter (see "Maintenance – Activating the Comfort-
Clean function").
Clean both filters thoroughly (see "Maintenance –
Cleaning the pre-filter and fine dust filter").
The fine dust filter is worn.
Insert a new fine dust filter (HX FSF-2).
en
87
Advertenties
Hoofdstukken
Inhoudsopgave
