REMOTE CONTROL
The remote control can be used for the same functions as the control panel
on the air cooler. Aim the remote control to the sensor for a good operation.
The remote control is provided with a battery included - CR2025.
Remove the battery if you will not be using the remote control for a longer period
of time.
5
cleaning and maintenance
Before cleaning the air cooler, switch off the appliance using the on/off key
Cleaning the exterior
Clean the exterior of the appliance with a damp cloth or sponge. If necessary, you can clean the exterior of the appliance
by means of a mild washing-up liquid.
• Do not use aggressive or abrasive cleaning agents for cleaning the appliance.
• Ensure no water reaches the control panel.
• Dry the exterior of the appliance.
• Never submerge the appliance, cord or plug in water or any other liquid.
Cleaning the air filter
In order to allow the air cooler to function as well as possible, we recommend cleaning the air filter regularly. The air filter
could get clogged with dust and dirt.
• Unscrew the air filter at the rear of the appliance and remove it from the appliance.
• Remove the cooling block from the holder. Clean it immediately, if necessary.
• Clean the air filter with a mild detergent in lukewarm water (approx. 40°C). Then properly rinse clean the air filter with
clean water and allow it to dry in the air. Do not place the air filter in the sun or on the heating to dry it.
• Place the air filter back in the appliance. Check that it is fully dry, before using the air cooler again.
• Depending on use, it is recommended to clean the air filter every 2 months.
• The air filer will have a longer life span if you allow it to dry after every use of the COOLING mode. Switch off the
COOLING mode and allow the appliance to ventilate for another 15 minutes, so that the air filter is able to dry.
Cleaning the cooling block
When you have removed the air filter, you can also remove the cooling block. Remove the cooling block from the holder,
clean it with clean water and a soft brush and then carefully place it back in the holder. Do not use detergents, as they can
affect the cooling block.
Cleaning the ventilation grilles
In order to allow the air cooler to function as well as possible, you can clean the ventilation grilles by means of a vacuum
cleaner with a soft brush nozzle.
Cleaning the water tank
Remove the water tank from the appliance and carefully disconnect the pump from the water tank. Throw away any water
that is still present in the water tank and clean the tank with a soft detergent and warm water. Properly rinse with clean water
and dry. Fasten the pump in the holder again and place the water tank back in the appliance.
Seasonal maintenance
Clean the air cooler after the end of the season, before storing it.
1. Empty the water tank and clean it in accordance with the instructions.
2. Clean the air filter and allow it to dry properly.
3. Store the cooling elements in the water tank.
4. Cover the air cooler and store it upright on a dry location.
16
•
English
and always remove the plug from the socket.