Advertenties
Beschikbare talen
Beschikbare talen
14
D e l l L a t i t u d e C / Po r t I I A P R S y s t e m I n f o r ma t i o n G u i d e
Docking for the First Time With Windows NT 4.0
Dock and turn on your computer.
1
Either press <F2> during the system boot routine, or press
2
<Fn><F1> after your computer boots to view the system setup
program.
Set Docking IRQ to Optimized.
3
Set Universal Connect to Enabled.
4
Exit the system setup program.
5
Press <Ctrl><Alt><Del> to log on.
6
The Docking Station Setup window appears and indicates that the
computer must be undocked to continue.
Click OK and wait for the computer to turn off.
7
Undock the computer (see "Undocking the Computer").
8
The computer restarts automatically. If it does not, turn on the
computer.
Click Start and select Shut Down.
9
Wait for the computer to turn off completely and redock the computer
10
to the docking device.
The computer restarts automatically. If it does not, turn on the
computer.
Press <Ctrl><Alt><Del> to log on.
11
The computer automatically detects new devices.
When prompted, select Install System Provided Driver for the
12
Selected Device (Recommended) and click OK.
Click Continue at the Windows NT Setup window.
13
Select Install System Provided Driver for the Selected Device
14
(Recommended) and click OK.
Select the name of your network interface controller (NIC) from the
15
drop down menu.
Advertenties
