Advertenties
Beschikbare talen
Beschikbare talen
mice as perturbing and nasty, so that they flee from the corresponding
vehicle.
Assembly
The Marten-Mouse-Free-Device is fastened by means of self-tapping
screws or binders in the engine compartment on the carriage. The
connecting cable to the car battery must be passed in that manner that it
doesn't get in contact with movable or hot parts (e.g. ventilating wheel,
exhaust manifold). The device should be placed in the engine
compartment in that manner that the acoustic noise can constantly
spread and is not absorbed by insulating mats.
ATTENTION: The assembly should be carried out by authorised
specialised staff!
Electrical connection
The device is directly connected to the car battery. The black cable is
connected to the positive pole, the brown one to the negative pole. If
additionally the grey cable is connected to clamp 15 (ignition lock, car
radio) of the car battery, the control automatically switches on the device,
when the ignition is turned off and automatically switches it off, when the
ignition is switched on. This increases the durability of the device, as it is
only put into operation with the motor turned off.
NOTICE: If you do not intend to use your car for some time, please
disconnect your Marten-Mouse-Free to preserve the battery
Important Note! Electrical connection by CAN/BUS system: Vehicles
with CAN/BUS system should be connected to the grey wire of the
fuse terminal 15.
General information
1. Electric appliances, packaging material etc. should be kept away from
children.
2. Dispose packaging and worn out material correctly and in an
environmentally friendly way.
3. Do only pass on the device including the operation manual.
4. Subject to change of design and technical data without notice for the
sake of constant product improvement.
Advertenties
