You can store up to 20 stations, 10 stations in DAB+ mode and 10 stations in FM mode.
1. Set the desired station.
2. Press the [Preset] button for about 3 seconds.
3. Use [
] or [
] buttons to select the number where you want to store the station and press [ENTER] button to confirm.
4. Confirmation appears on the display.
5. Once a station has been stored, you can recall the station by pressing the [Preset] button.
6. Use the [
] or [
] buttons to scroll through the preset stations and press the [ENTER] button to select the desired
station.
Connect a mobile device to the radio using AUX.
Switch to AUX mode by pressing the [Mode] button and selecting "AUX" or
1. Connect a mobile device to your radio using an AUX cable (not supplied).
2. Play the desired audio file from your mobile device.
3. Adjust the volume using the volume control or [VOLUME] button
The AUX terminal allows you to connect various devices such as an MP3 player, cassette player, minidisc player, DVD player,
etc. to the AUX terminal.
1. Push the [info/menu] button for a few seconds
2. Go to <Factory Reset> with the [
3. select <Yes> with the [
4. After the radio is reset, the radio will start searching for DAB+ radio stations and will set the time again if there is a strong
DAB+ signal.
Note: Please note that all programs will be deleted after the reset.
Radio
•
Clean the radio with a slightly moistened cloth. The cloth must not be wet! Do not use aggressive cleaning agents!
•
Do not place the radio in a hot, humid or dusty place.
•
Keep your radio away from devices that generate heat or emit electrical signals.
] or [
] buttons
] or [
] buttons en push the [Enter] button
7