Advertenties
Beschikbare talen
Beschikbare talen
Press the [POWER]-button directly on the radio to turn on the unit.
On the display you will see ''Welcome to Digital Radio'',
The radio starts searching for DAB+ radio stations and sets the time and date automatically when there is a DAB signal
available.
Note: if there is no DAB Signal, switch the radio off and move it to a location with a stronger signal.
If you push the [Power] button again the Radio will go to standby mode and the backlight will dim after a few seconds.
Note: Set the time manually if you are not receiving DAB+ signal. As soon as the radio receives DAB+ signal, the time will be
set automatically.
Manual time setting
1. In when the unit is on, press the [Info/Menu] button for a few seconds to enter the time/date menu and push [Enter] to
access
2. Press [Enter] to set the hour with the [
3. Set the minutes using the [
4. Press enter again to set the year/month/date. Press [Enter] again to save the settings and close the menu
1. press the [Alarm] button for about 3 seconds until the ''Alarm 1'' or ''Alarm 2'' will appears on the display:
2. Press enter and select if you want to select to put a alarm on or off with the [
3. Set the hour with the [
4. Set the minute using the [
5. Set the volume using the [
6. Set the Alarm mode [choose between DAB,FM or Alarm] using the [
7. Now the alarm is activated or deactivated
Note: You can use the [Snooze] button when the alarm is ringing, the alarm will turn off and after a few minutes it will be
activated again ''Snooze''.
When the radio is connected to the power supply for the first time, Press the mode button to select DAB+
When station search is complete, you can use the [
displayed alphabetically. To select a station, press the [ENTER] key.
Full Scan
The "Full Scan" searches all DAB+. After searching for a channel, the found channels are listed alphabetically and the first
channel is played back.
1. To activate the scan, press the [SCAN] button until the display shows <Full Scan>
2. All found stations are automatically saved. Use the [
button to select the
station.
Switch from DAB+ mode to FM mode by pressing the [Mode] button and selecting FM, The display will show the frequency.
Automatic station search
Press the [SCAN] button on the radio to start the automatic station search.
When a station is found, the scan stops automatically.
Manual station search
Press the [PREV/NEXT] buttons to manually select a station.
] or [
]-button. Press the [Enter] button to confirm the hour.
] or [
]-button. Press the [Enter] button to confirm.
] or [
] button and confirm with the [Enter]-button.
] or [
] button and confirm with the [Enter]-button.
] or [
] button and confirm with the [Enter]-button.
] or [
] or [
] or [
] button and confirm with the [Enter]-button.
]-button to tune in the individual stations. The stations are
] or [
]-button to find the desired station and press the [ENTER]
6
] buttons and press enter again.
Advertenties
