Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UK
2
3
6.
Storage
If the unit will not be used for an extended period, do the following:
1. Unplug the unit.
2. Clean the air filter with a vacuum cleaner.
3. Make sure the device is in perfect condition so that it is safe to use again after a long
storage period.
4. Store the unit in appropriate packaging.
5. Store the unit in a dust-free place and out of direct sunlight. It is recommended to
cover it with a piece of plastic.
7.
Display Error Codes
Please contact your local distributor if any of the error codes below appears.
No.
1
2
3
5
6
7
8
9
10
11
12
84
Clean the cabinet with a soft, dry cloth. If the unit is very
dirty, use a mild detergent. Wipe the dehumidifier with a
slightly damp cloth. Never spray water on the unit.
Remove the filter (air inlet in the bottom), clean the filter with
a vacuum cleaner or soapy water no hotter than 40°C.
Display code
E1
E2
E5
E8
EA
Eb
P0
P1
P2
P3
P5
MV-2538-2540-2542-02-2023 . eeese-aircare.com © All rights reserved by eeese air care ApS
Error
High pressure protection
Low pressure protection
Abnormal power supply voltage protection
Exhaust high temperature protection
Air out high temperature protection
Environmental low temperature protection
Controller failure
Air inlet temperature sensor failure
Air outlet temperature sensor failure
Exhaust gas temp sensor failure
Gas return temperature sensor failure
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
