Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
THERMO SENSOR
RAIN GAUGE
If without obvious reason the main unit display
shows that the thermo sensor or rainfall connector is
disconnected, press and hold SEARCH to enforce an
immediate search.
If that fails, check:
•
The remote rain gauge and thermo sensor are still
in place.
•
The batteries of the main unit, rain gauge, and
thermo sensor are still good. Replace them if
necessary.
•
The transmission is within range and path is clear of
obstacles and interference. Shorten the distance if
necessary. Then press and hold SEARCH again.
LOW BATTERY WARNING
There are 3 low-battery indicators - see table.
UNIT
LOCATION ON MAIN UNIT DISPLAY
Main
Indoor Temperature Area
Remote Thermo
Outdoor Temperature Area
Sensor
Rain Gauge
Total Rainfall Area
Replace the batteries immediately when the respective
DESCRIPTION
indicator lights up.
Searching
CLOCK / CALENDAR SETTING
Connected
Press TIME / SET to toggle among today's rainfall, time,
Disconnected
date, and year.
SET CLOCK AND CALENDAR
.
Press TIME / SET to display the clock or
calendar.
2.
Press and hold TIME / SET for two seconds.
3.
Use
4.
Press TIME / SET to confirm.
5.
Repeat steps 3 and 4 to complete all settings.
6.
The order of the settings is hour, minute, year, month
and day.
RAINFALL
Today's rainfall appears on the st line of the display
and total rainfall is shown on the 2nd line. Press in /
mm to toggle between inches and millimeters as the
unit of measurement.
RAINFALL HISTORY
The rainfall history is displayed on the st line of the
LCD display. The main unit can record up to 9 days
of rainfall.
8
or
to set the desired value.
Advertenties
Hoofdstukken
Inhoudsopgave
