Download Inhoudsopgave Inhoud Print deze pagina

Total Rainfall; Rainfall Alarm; Temperature; Reset - Oregon Scientific RGR126 Handleiding

Draadloze regenmeter met binnen- / buitenthermometer
Inhoudsopgave

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

  • DUTCH, pagina 64
Use HISTORY to display the record for a particular
day. The day of the record will be displayed with a
minus (-) sign.
Caution: Other sensors using the 433 MHz transmission
frequency may influence the rainfall reading. Please
avoid placing those sensors too close to the unit.

TOTAL RAINFALL

The total rainfall is displayed on the 2nd line of the
LCD display.
To display the commencing date of the total rainfall
record, press SINCE. The date will appear on the st
line of the display. Press again to show the commencing
year.
To clear the existing commencing date and reset it to
start again, press and hold SINCE. The total rainfall will
now be equal to the today rainfall and the unit will start
again to collect the rainfall data.

RAINFALL ALARM

The rain alarm value can be displayed at any time by
pressing (( • )).
To set the rainfall alarm:
.
Press and hold (( • )) for two seconds.
2.
Use
or
to set the desired value.
3.
Press (( • )) to confirm. The alarm will be activated.
The rain alarm indicator will light up.
The alarm will go off for one minute when the rainfall
reaches the preset value and the rain alarm indicator will
flash. A reminder beep will be emitted every minute. Once
the rain alarm is on the indicator will not stop flashing
unless
is pressed or the rain alarm value is changed.
To stop the alarm and reminder beep, press any button
or change the rainfall alarm value.
To deactivate the alarm, press

TEMPERATURE

The outdoor temperature is displayed on the 3rd line of
the LCD display. Use the °C / °F button to select between
Centigrade and Fahrenheit display units.
The indoor temperature is displayed on the 4th line of the
LCD display. Use the °C / °F button to select between
Centigrade and Fahrenheit display units.

RESET

This button should only be used when the unit is
operating in an unfavorable way. Use a blunt stylus
to hold down the button. All settings will return to their
default values.

PRECAUTIONS

This product is engineered to give you years of
satisfactory service if you handle it carefully. Here are
a few precautions:
9
.

Advertenties

Inhoudsopgave
loading

Inhoudsopgave