Inhoudsopgave
Advertenties
5. Installation on the removed cylinder (anti-
clockwise unlocking)
1.
Insert the 1.5 mm hex key into the escape thumb turn.
5
2. Turn the hex key fully clockwise until it comes to a stop.
9
Escape thumb turn clicks.
6
3. Pull out the hexagon wrench again.
4. Place the escape thumb turn on the cylindrical shaft.
14
5. Hold the cam firmly and turn the escape thumb-turn
clockwise until it stops.
15
6. Insert the 1.5 mm hex key into the escape thumb turn.
16
7. Turn the 1.5 mm hex key fully counter-clockwise until it
will go no further.
Escape thumb turn clicks.
9
17
8. Reinstall the cylinder.
18
9. Tighten the fastening screw.
50 / 112 | EN
Advertenties
Inhoudsopgave
