Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
MAINTENANCE
Changing the sensor and the cable
• Remove the existing sensor cable assembly and installing the new assembly: Fig. BA to BN or BK
(pages 29-31) depending on the model.
• Replacing the elements in the spout: Fig. BO to BS (page 32) depending on the model.
• Put the switch in the "ON" position.
• Prime the pump: cf. INSTALLATION section > Priming the pump.
Changing the soap and air tubes
• Follow the instructions Fig. CA to CK (pages 33-34).
• Put the switch in the "ON" position.
• Prime the pump: cf. INSTALLATION section > Priming the pump.
Battery replacement
• Follow instructions Fig. DA to DD (page 34).
• Turn the switch to ON.
• Prime the pump: cf. INSTALLATION section > Priming the pump.
MAINTENANCE & CLEANING
• Cleaning chrome and stainless steel: do not use abrasive, chlorine or any other acid-based
cleaning products. Clean with mild soapy water using a cloth or a sponge.
• Frost protection: drain the pipes and operate the mixer/tap/valve several times to drain any
remaining water. In the event of prolonged exposure to frost, we recommend taking the mechanisms
apart and storing them indoors.
DELABIE
For the UK market only: Tel. 01491 821 821 - email: technical@delabie.co.uk
For all other markets: Tel. +33 (0)3 22 60 22 74 - email: sav@delabie.fr
After Sales Care Support:
The installation guide is available on: www.delabie.co.uk
The installation guide is available on: www.delabie.com
EN
5
Advertenties
Inhoudsopgave
