Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
BLUETOOTH INPUT
DEFAULT PIN: 1111
When speakers are turned on or when Bluetooth selected, the Bluetooth radio will be in pairing
mode for 10 minutes. The Blue LED will flash while in pairing mode, then stay on when paired.
If "Bluetooth Priority" is on the speakers will automatically switch to the Bluetooth source when
a device is paired.
CHANGE BLUETOOTH DEVICE NAME AND PIN
1.
DOWNLOAD AND INSTALL BLUESUITE SOFTWARE (WINDOWS ONLY) FROM
https://visionaudiovisual.com/techaudio/cs-1800p/
2.
PAIR PHONE TO SPEAKERS
3.
PRESS BUTTON ON REAR OF SPEAKERS Release when Blue LED on front turns off
4.
CONNECT PC TO SPEAKERS WITH USB CABLE (NOT INCLUDED)
5.
RUN PSTool APPLICATION. Select USB\csr0 port as below
NOTE: if port is not showing load drivers manually from
C:\Program Files (x86)\CSR\BlueSuite 2.6.4\drivers
TYPE "NAME" IN FILTER Adjust then select Set
6.
CS-1800P_manual_en_v3.doc_v3
11
Advertenties
Inhoudsopgave
