Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Connecting to the Pool
1.
Turn off your pool pump. Block the inlet and outlet of your pool so that the water won't
empty when you are connecting your panel(s).
2.
Remove the hose from the pool inlet ( hose between the filter and the pool ) and connect the
hose to the panel inlet. If hose is too short, you need to purchase a new one. Make sure
you purchase the appropriate size that is compatible with your existing pool equipment.
For 11/4" hose, it will only slide over the small end of the combination adapter. See Fig C1-1.
For 11/2" hose, it will slide all the way to flange of combination adapter. See Fig C1-2. Place
metal collar 1/4" from edge and tighten collar with screwdriver. See Diagram C-1.
Fig C1-1
3.
Connect another hose (not supplied) from the panel outlet to the pool inlet. See Diagram C-1.
Diagram C-1
To Panel
Inlet
38
Pool Outlet
Swimming Pool
From Panel
Outlet
Filter
Pump
Pool Outlet
Swimming Pool
Pool Inlet
Fig C1-2
Pool Inlet
MV-1501-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
UK
Advertenties
Hoofdstukken
Inhoudsopgave
