Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
UK
Installation (one system on ground)
•
Apply Teflon tape to threads of all 2 caps (SK-FTG-F ) See Fig 3a-1
•
Thread all 4 caps into the panels as per Diagram Step 3a. Do not over tighten. See Fig 3a-2
•
Put "O" rings (SK-FTG-I ) on both combination adapters (SK-FTGD) See Fig 3a-3
•
Thread both combination adapters into the panels as per Diagram Step 3a. Do not over
tighten. See Fig 3a-4
•
Push the hose (SK-FTG-J ) over the panel header as per Diagram Step 3a. Slide a metal
collar (SK-FTG-L) onto the hose. Place metal collar 1/4" from edge and tighten collar with
screwdriver. See Fig 3a-5.
•
Slide another metal collar onto the hose. Connect the 2 panels together by pushing the
rubber hose over the second panel header. Tighten metal collar to secure assembly.
See Fig 3a-6
Fig. 3a-1
Fig. 3a-4
MV-1501-11-2017 . © All rights reserved Swim & Fun Scandinavia ApS
Outlet
Inlet
Fig. 3a-2
Fig. 3a-5
Fig. 3a-3
Fig 3a-6
37
Advertenties
Hoofdstukken
Inhoudsopgave
