Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
In programmed mode the open window detection function is disabled so that the product can correctly follow the
temperature profile defined by the user.
Frost free Mode
In this mode the thermostat is automatically set to maintain 7±3°C.
6. Using the heater
STAND-BY BUTTON
Use the
button to turn on or put the product in Stand-by. When the product is in Stand-by, two white dashes appear on
the display:
When the product is turned on, it activates in Automatic mode. The message "AU" is shown for 3 seconds on the display and,
after, the set temperature is shown:
OPERATING MODES
M
By pressing the
button it is possible to select Automatic, Programmed or Frost free mode as described in paragraph 5:
Press the
grammed mode. The display shows "Pr".
The clock symbol and the icon relating to the opera-
ting mode set for the current time and day (comfort,
eco or antifreeze) also light up on the display.
Press the
frost free mode. The display shows "FF" for 3 se-
conds and then the expected temperature of 7.0 ° C
(not modifiable) and the antifreeze mode symbol also
lights up on the display.
Press the
mode and restart the cycle.
3"
M
key to switch from automatic to pro-
M
key to switch from programmed to
M
button again to return to automatic
25
3"
Advertenties
Inhoudsopgave
