Advertenties
Beschikbare talen
Beschikbare talen
Operation
7
Operation
7.1
Before first use
Before first use, clean the wine cooler inside and outside with a damp cloth for
hygienic reasons (see also chapter "Cleaning and maintenance" on page 29).
7.2
Storing bottles
Please note the following:
• Only store wine in wine bottles that are closed and still sealed.
• Do not overload the wine cooler.
• Do not cover the shelves with aluminum foil or any other objects, as this obstructs
the air circulation.
• After a power cut or if the wine cooler has been switched off, wait 3 to 5 minutes
before switching on the wine cooler again.
➤ Position the bottles as shown in fig. g, page 11 to fig. j, page 12.
7.3
Saving energy
• Only open the wine cooler as often and for as long as necessary.
• Avoid unnecessarily low temperature settings.
• For optimal energy consumption, position the shelves and drawers according to
their position on delivery.
• On a regularly basis, make sure the door seal still fits properly.
• Clean dust and dirt from the condenser at regular intervals.
7.4
Switching on and off
➤ To switch on and off, press the
7.5
Setting the temperature
To avoid food waste, note the following:
• Keep temperature fluctuation as low as possible. Only open the wine cooler as
often and for as long as necessary. Store the wine bottles in such a way that the
air can still circulate well.
• Adjust the temperature to the quantity and type of the wine bottles.
24
C18B, C46B, D18B, D42B, D46B
button for at least 6 seconds.
EN
Advertenties
