Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
The settings for program 1 for Monday are programmed and
the display shows SET for 3 seconds .
After 3 seconds choose another day or end the setting mode
by pressing timer .
Press the "timer" key to exit the weekly timer setting mode and return to the time and a
day of the week display . Timer lamp turns off .
COPYING THE SETTING FROM ONE DAY TO ANOTHER
Use the copy function if there are multiple days during one week which should have the
same setting times .
Make sure that the heater is not burning . Press the timer key
. Use the adjustment keys N until the day of its source is
displayed in the display .
Press extension/day/set to select .
The display shows:
Use the adjustment keys M or N N to choose copy . Press
extension/day/set to select the copy function .
Use the adjustment keys M or N N to select the day to which
the settings should be copied . Press extension/day/set to
choose the selected day .
The settings for program for Tuesday are programmed and
the display shows SET for 3 seconds .
After 3 seconds choose another day to copy or end the
setting mode by pressing timer .
OPERATING THE WEEKLY TIMER
Switch on the heater by pressing the POWER button L . And then press the timer-key
immediately after that . The Timer light will light up and the heater shuts off . The On / Off
indicators on the display shows whether the appliance is switched on or off .
When the appliance is switched off by the timer, the off
indicator is visible . The display shows the -actual time .
When the appliance is switched on by the timer, the on
indicator is visible . The display shows the desired (set) and
actual (room) temperature .
4
8
Advertenties
Inhoudsopgave
