Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Environmental
conditions
Gross
dimensions
International
Commission on
Non-Ionising
Radiation
Protection
(ICNIRP)
Service life
Mask setting
options
Notes:
• This product is not made with PVC or phthalates such as DEHP, DBP
or BBP.
• This product is not made with natural rubber latex.
• The manufacturer reserves the right to change these specifications
without notice.
12
Operating temperature: 5°C to 40°C
Operating humidity: 15% to 95% non-condensing
Storage and transport temperature: -20°C to +60°C
Storage and transport humidity: up to 95% non-condensing
Mask fully assembled with elbow assembly (no headgear)
154 mm (H) x 159 mm (W) x 147 mm (D)
Magnets used in this mask are within ICNIRP guidelines for general
public use.
The service life of the F20 mask system is dependent on the intensity
of usage, maintenance, and environmental conditions to which the
mask is used or stored. As this mask system and its components are
modular in nature, it is recommended that the user maintain and
inspect it on a regular basis, and replace the mask system or any
components if deemed necessary or according to the 'visual criteria
for product inspection' in the 'Cleaning your mask at home' section of
this guide. Refer to the 'Mask components' section of this guide for
information of how to order replacement parts.
For AirSense, AirCurve or S9: Select 'Full Face'.
For other devices: Select 'MIR FULL' (if available), otherwise select
'FULL FACE' as the mask option.
Advertenties
Inhoudsopgave
Probleemoplossen
