Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
described in this manual to get to know your
normal blood pressure. Regular readings
give a more comprehensive blood pressure
history. Be sure to note date and time when
recording your blood pressure. Consult your
doctor to interpret your blood pressure data.
Problem
Nothing appears
in the display,
even when the
device is turned
on.
The cuff does
not inflate.
The device does
not measure.
Readings are
too high or too
low.
Other
Note: If the actions described above do not solve the problem, contact the
dealer. Do not attempt to open or repair this product, as any attempt to do
so will make your warranty invalid.
Troubleshooting
Possible Reason
Batteries are drained.
Battery terminals are not
in the correct position.
Battery voltage is too low.
(LOW BATTERY
mark) blinks. [ If the
batteries are drained
completely, the mark
does not appear.]
The cuff is not applied
properly.
You moved your arm
or body during
measurement.
The cuff position is not
correct.
The value is different
from that measured at a
clinic or doctor's office.
English 18
Typical fluctuation within a day
(Measured every five minutes)
Diastolic
PM
Recommended Action
Replace all batteries with new ones.
Reinstall the batteries with
negative and positive terminals
matching those indicated on the
battery compartment.
Replace all batteries with new
ones.
Apply the cuff correctly.
Make sure you remain very still
and quiet during measurement.
Sit comfortably and still. Place
your arm on a table with your palm
facing upward and the cuff at the
same level as your heart.
If you have a very weak or
irregular heartbeat, the device
may have difficulty in determining
your blood pressure.
Refer to "Why Measure Blood
Pressure at Home?".
Remove the batteries. Place them
back properly and try the
measurement again.
Systolic
Sleep
AM
Time
Advertenties
Hoofdstukken
Inhoudsopgave
