Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
4. Temperature setting
In comfort mode
to select the desired set temperature. The temperature range for comfort mode and Pilot wire mode is
between 5°C and 29°C and for Eco mode is between 1.5°C and 25.5°C. The temperature difference between
the ECO mode and the COMFORT mode must be at least 3.5°C. Each time you press the buttons to adjust the
temperature, you increase or decrease the temperature by 0.5°C. Press any other button except
finish the setting, otherwise after 5 seconds without action the setting is automatically saved. When the room
temperature is the same or higher than the selected temperature, the heater will stop heating.
5. Keyboard lock
Press M button for three seconds to activate the keyboard lock function
seconds.
Remarks:
1. The keyboard lock function does not lock the standby
2. The keyboard lock function will automatically be deactivated under the below circumstances.
1) the appliance is put into standby mode by pressing standby
2) the appliance suffers power disconnection.
If you want this option to be activated again you will need to press the M button for 3 seconds.
6. Window detector function
Press
to enter window detector function. Then press "
selected, the window detection function is activated and
drop is detected, the appliance will automatically enter anti-freeze mode with
rises up, the appliance will go back to previous mode with
window detection function.
Remarks: the window detector function is not available under anti-freeze mode.
, or Pilot wire mode
P
or Eco mode
Keyboard lock
button.
icon will show on the screen. When temperature
EN-12
(excluding anti-freeze mode
, to unlock, press M again for three
button.
/
" to choose "ON" or "OFF". If "ON" is
icon flashing. If temperature
icon on. You can choose "OFF" to disable the
), press
or
/
to
Advertenties
Inhoudsopgave
