Advertenties
Beschikbare talen
Beschikbare talen
Setting up and connecting the appliance
7
Setting up and connecting the
appliance
7.1
Notes on setting up the appliance
S17G, S46G, S118G and ST198D can be placed free-standing.
When selecting the location, observe the following instructions:
The ambient temperature should be in accordance with the climate class men-
tioned for your country in the supplementary brochure. Otherwise, it is possible
that the inner temperature you set cannot be reached or maintained. This could
also be the case if there are extreme fluctuations in the ambient temperature.
The appliance should stand in the coldest part of the room, away from heat
sources (ovens, heating devices or radiators).
The location must not be damp or wet.
The appliance must not be exposed to direct sunlight. This can damage the
acrylic coating and lead to higher power consumption.
The ground must be level and sufficiently stable to support the wine cellar at full
capacity.
The appliance must be sufficiently ventilated. The ventilation slots on the front of
the appliance must not be obstructed.
Note the information on the electrical connection, see chapter "Notes on the
electrical connections" on page 21.
Remove all the inner and outer packaging material before setting up.
Make sure the appliance is level by adjusting the feet.
7.2
Notes on installing the appliance
A
NOTICE!
When mounting ensure that the ventilation openings are kept free.
Covered ventilation openings result in an increase of electricity con-
sumption and can damage the device.
When pushing the appliance into place, ensure that the mains cable
does not get pinched.
S17G and S46G can be mounted into a kitchen plinth beneath the kitchen counter.
S24G, S118G and ST198D can be mounted into a kitchen cabinet .
18
MaCave
EN
Advertenties
