Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
TFA_No. 47.3006_Anl_03_23
05.03.2023
Wireless rain gauge
7.2 Wake-up process
• When the alarm is activated, the alarm starts to ring when the set alarm time is reached. The backlight turns on for a short period.
• Press any button (except SNOOZE/LIGHT) and the alarm will stop.
• If the alarm is not stopped manually, the ascending alarm tone automatically turns off after one minute and will be reactivated at the
same set time in the following day.
• When the alarm rings, press the SNOOZE/LIGHT button and the snooze function is activated. Provided that in the alarm setting mode
the snooze function is not deactivated.
• The snooze symbol and the respective alarm symbol are flashing on the display.
• The alarm will be interrupted for the set time.
• Press any button (except SNOOZE/LIGHT) and the snooze function will stop.
8. Temperature
8.1 Trend arrows
• The trend arrows indicate whether the values for temperature are currently increasing or decreasing.
Temperature is increasing
Temperature is decreasing
8.2 Maximum and minimum values
• Press the MEM button in normal mode.
• You can now see the highest (MAX) values since the last reset.
• Press the MEM button again.
• You can now see the lowest (MIN) values since the last reset
• Press the MEM button once more to go back to the current values display.
• The device will automatically quit the MAX/MIN mode if no button is pressed.
• Press and hold the MEM button to clear the recorded reading (display - -).
9. Rain
9.1 Rainfall amount indication
• Press the RAIN/ALERT button in normal mode to change the display between the rainfall amount indications: The last selected dis-
play is permanently active (default NOW).
– NOW - rainfall amount at the start of the rain, automatic reset 30 minutes after rain has finished
– Rainfall amount of the last hour (1HOUR)
28
14:39 Uhr
Seite 15
Wireless rain gauge
– Rainfall amount of the last 24 hours (24HRS)
– Rainfall amount of the current day (TODAY)
– Rainfall amount of the last 7 days (7 DAYS)
– Rainfall amount of the last month (MONTH)
– Rainfall amount of the last year (YEAR)
– Indication of TOTAL rainfall amount since setting up or the last reset.
• Hold HIST/UP and RAIN/ALERT button for 3 seconds to clear the recorded reading. The HISTORY memory values are retained.
9.2 Cylinder graph rainfall amount
Scale (10 segments = 100 %)
25,4 mm
(1 Inch)
Rainfall amount per segment
2.54 mm
(0.1 Inch)
Sample value
2 segments
= 5.08 mm
50,8 mm
127 mm
1270 mm
(2 Inches)
(5 Inches)
(50 Inches)
5.08 mm
12.7 mm
127 mm
(0.2 Inch)
(0.5 Inch)
(5 Inches)
5 segments
8 segments
10 segments
= 25.4 mm
= 101.6 mm
= 1270 mm
Maximum
rainfall that
can be
displayed
29
Advertenties
Inhoudsopgave
