Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Overheat warning lamp
Flashing: Overheat
Off
(normal
Indicates operation has
operation)
been halted due to battery
overheating.
The overheating protection feature
halts operation to protect the battery
pack in the event of overheating. The
overheat warning lamp on the control
panel flashes when this feature is ac-
tive.
• If the overheating protection feature
activates, allow the tool to cool tho-
roughly (at least 30 minutes). The
battery is ready for use when the
overheat warning lamp goes out.
• Avoid using the tool in a way that
causes the overheating protection
feature to activate repeatedly.
Battery low warning lamp
Off
(normal
operation)
ssive (complete) discharging of li-
Exce
thium ion batteries shortens their ser-
vice life dramatically. The tool includes
a battery protection feature designed to
prevent excessiv
battery pack.
• The battery protection feature acti-
vates immediately before the battery
loses its charge, causing the battery
low warning lamp to flash.
• If you notice the battery low warning
lamp flashing, charge the battery
pack immediately.
Flashing
(No charge)
Battery protection
feature active
e discharging of the
- Accidental re-start preventive function
- Even if the battery pack is inserted
on the tool with the power switch in
the "ON" position, the tool does not
start. At this time, the lamp flickers
slowly and this shows that the ac-
cidental re-start preventive function
is at work.
- To start the tool, first slide the power
switch toward the "OFF" position
and then slide it toward the "ON"
position.
[Battery Pack]
For Appropriate Use of
Battery pack
Li-ion Battery pack
• For optimum battery life, store the
Li-ion battery pack following use
without charging it.
• When charging the battery pack, con-
firm that the terminals on the battery
charger are free of foreign substances
such as dust and water etc. Clean the
terminals before charging the battery
pack if any foreign substances are
found on the terminals.
The life of the battery pack terminals
may be affected by foreign sub-
stances such as dust and water etc.
during operation.
• When battery pack is not in use,
keep it away from other metal ob-
jects like: paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connection
from one terminal to another.
Shorting the battery terminals to-
gether may cause sparks, burns or a
fire.
• When operating the battery pack,
make sure the work place is well
ventilated.
- 13 -
Advertenties
Inhoudsopgave
