Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
minutes;
6. Press the "T" button once again and the "daytime" setting is
finalised. The "MOON" symbol appears and the "night-time"
hours will start blinking; turn the knob at the back to adjust the
"night-time" hours;
7. Press the "T" button once again and the "night-time" minutes
will start blinking, turn the knob at the back to adjust the "night-
time" minutes;
8. Press the "T" button once again and the "night-time" setting
is finalised.
SET TEMPERATURE and HEATING MODE:
Daytime:
1. To set the "daytime" heating mode, temperature and humidity
press and hold the "SUN" button at the back of the thermostat
during 4 seconds.
2. The heating mode will start blinking; turn the knob at the back to
select the desired heating mode (ON/OFF or Dimming);
3. Press the "SUN" button once again and the temperature that
is currently set will start blinking; turn the knob at the back to
adjust the temperature;
4. Press the "SUN" button once again and the humidity level that
is currently set will start blinking; turn the knob at the back to
adjust the humidity level;
5. Press the "SUN" button once again and the desired "daytime"
heating mode, temperature and humidity setting is finalised.
Night-time:
1. To set the "night-time" heating mode, temperature and humidity
press and hold the "MOON" button at the back of the thermostat
during 4 seconds.
8
2. The heating mode will start blinking; turn the knob at the back to
select the desired heating mode (ON/OFF or Dimming);
3. Press the "MOON" button once again and the temperature that
is currently set will start blinking; turn the knob at the back to
adjust the temperature;
4. Press the "MOON" button once again and the humidity level that
is currently set will start blinking; turn the knob at the back to
adjust the humidity level;
5. Press the "MOON" button once again and the desired "night-
time" heating mode, temperature and humidity setting is
finalised.
• To check the "daytime" heating mode, temperature and
humidity, simply press the "SUN" button
• To check the "night-time" heating mode, temperature and
humidity, simply press the "MOON" button.
• To check the current time settings, simply press the "T" button
for current time, press "T" button again for "daytime setting",
press "T" again for "night-time setting".
• After setting the temperature, you can always switch between
°C and °F by unplugging the device, then press and hold the "T"
button while plugging-in the device. This will switch between °C
and °F, without changing your settings.
1. A Red LED will indicate when the heating device is powered
and once the set temperature is reached, the Red LED will no
longer show.
2. A Blue LED will indicate when the humidifying device is powered
and once the set humidity level is reached, the Blue LED will no
longer show.
"Please note that the Red or Blue LED indicates power to the
attached heating or humidifying device and not mains power to the
Exo Terra
Thermostat/Hygrostat."
®
GUARANTEE
This product is guaranteed for defective parts and workmanship
for a period of 2 years from the date of purchase. This guarantee is
valid with proof of purchase only. The guarantee is limited to repair
or replacement only and does not cover consequential loss, loss or
damage to livestock and personal property or damage to animate or
inanimate objects, irrespective of the cause thereof. This guarantee
is valid only under normal operating conditions for which the unit
is intended. It excludes any damage caused by unreasonable use,
negligence, improper installation, tampering, abuse or commercial
use. The warranty does not cover wear and tear, breakage of glass or
parts which have not been adequately or correctly maintained. THIS
DOES NOT AFFECT YOUR STATUTORY RIGHTS.
Your Exo Terra Thermostat includes a 2 year standard warranty. To
extended the warranty by a further 3 years, simply register your
product online. It's fast, easy and completely free! Complete
the online form at: www.exo-terra.com The extended warranty
is subject to the provisions outlined within the standard 2 year
warranty.
RECYCLING
This item bears the selective sorting symbol for waste
electronic and electrical equipment (WEEE). This
means that the product must be handled pursuant to
European Directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment. For
further information please contact your local or regional authorities.
Electronic products not included in the selective sorting process are
potentially dangerous for the environment and human health due to
the presence of hazardous substances.
SERVICE
If you have any problem or question about the operation of this
product, please consult your Exo Terra
®
instance. Most problems can be resolved in store, but in the unlikely
event it cannot, please return the unit with a valid proof of purchase
to the retailer for a replacement under the two-year warranty. When
you call (e-mail or write) our Customer Service Department, please
have all relevant information such as model number and/or part
numbers available, as well as the nature of the problem:
Distribution and Customer Service:
U.K.:
Rolf C. Hagen (UK) Ltd.
California Dr. Whitwood Industrial Estate
Castleford, West Yorkshire WF10 5QH
mail to: http://faq.hagencrm.com/?uk
Helpline Number 01977 521015 (Between 9:00 AM and 5:00 PM,
Monday to Thursday and 9:00 AM and 4:00 PM on Friday – excluding
Bank Holidays)
specialist retailer in the first
Advertenties
Inhoudsopgave
